LXE50

5,000 lb. Capacity Integrated Lithium-Ion Four-Wheel Cushion Electric Forklift

Integrated lithium-ion provides simplicity and reduces cost.

Many businesses know that it takes Lithium-ion to get the most efficiency, uptime and cost effectiveness out of an electric forklift. And now customers are learning that it takes an integrated power source for simplicity of operation and optimal ergonomics. The Big Joe LXE50 delivers all of the above—an optimal package that supports the operator while driving down cost of operations. Big Joe is one of the few suppliers to develop and produce both forklift and battery, so customers have one expert supplier to help from end to end.

Pricing Spec Sheet

Features
Specifications
Videos

Product Highlights

UL-Recognized Integrated Lithium-ion Maintenance-free Battery
Available with 18.4kWh and 36.8kWh Batteries
Telemetry Monitoring System with Over-the-Air Updating
Bluetooth-Enabled LCD Display for Diagnostics and Tuning
Dual 80V AC Drive Motors
Wet Disc Service Brakes
Foot-Operated Parking Brake Lever
Large Step and Wide-Open Operator Space
Low Dash for Excellent Visibility

Capacity at 24in. Load Center	5,000 lbs.
Battery Size	36.8kWh
Overhead Guard Height (in.)	83.0
Overall Width (in.)	42.5
Right Angle Stack (in.)	93.9
Max Travel Speed (mph)	9.3
Max Lift Speed (ft/min.)	98.4

FOOTNOTE: Refer to specifications sheet for most up-to-date information. Lift trucks specifications are subject to change without notice. Any specifications critical to the intended application of the forklift should be reviewed with your Big Joe dealer.

A Battery without Headaches
The Lithium-ion battery is completely maintenance-free. That means no watering, toxic fumes or corrosive and explosive gases. And you only need one battery per truck—no cranes, hoists or roller systems for swapping batteries are required. This simplicity not only saves space in your warehouse—it also reduces overhead since staffing doesn’t need to be dedicated to battery services. And since the battery can fully recharge in two hours and doesn’t need to cool down after charging, your truck can spend more time working.¹

A Drivetrain for High Productivity and Low Operating Cost
Dual AC drive motors deliver fine inching control when precision matters, while also delivering high torque and smooth acceleration when it’s time to get moving. When it’s time to stop, regenerative motor braking recharges the battery, while standard wet disc brakes provide additional brake performance when needed. Operators can appreciate the performance and lack of engine noise. Business owners can appreciate the lack of fuel costs and not needing to worry about unexpected - and expensive - engine breakdowns.

¹2-hour charge time is based on the use of a 200A offboard charger operating under ideal conditions with proper power supplied to the charger. Actual charge times can increase in adverse environmental conditions or if sufficient power is not provided to the charger.