The maneuverability of a walker stacker plus the extended reach of a pantograph!

PDSR

AC Walkie Reach Stacker with Power Steering

3,000lb capacity models with lift heights to 189"

The PDSR combines the tight turning characteristics and low operating cost of a walkie straddle stacker with the flexibility of a counterbalanced truck through the use of a pantograph. This mechanism extends the loads being handled beyond the straddle legs to lift or lower products and can be retracted for compact turns. With the addition of power steering, sideshift, proportional hydraulics, and tilt, the PDSR delivers exceptional versatility and easy intuitive control.

The PDSR Features:

• 24volt ZAPI transistor control with high torque AC drive motor.

• Pantograph extends forks beyond straddle legs.

• Power steering, sideshift, tilt and proportional lift, lower, extend & retract

• Choice of 34"/42" or 42"/50" fixed straddle legs.

• Ergonomic control handle with safety reversing switch and horn

• Industrial battery or 224 AH Maintenace free battery pack

• Battery discharge indicator with hour meter

• Key switch to limit access to approved personnel

The PDSR Specifications:

• Vehicle TypeWalkie Reach Stacker
• Capacity3,000lbs.@ 24” load center
• Power24 volt AC electric with ZAPI controller
• Max Lift HeightMasts available up to 189"
• Collapsed HeightMasts available as low as 76.5"
• Fork Dimensions42" L x 4" W x 1.5" Thick
• Vehicle DimensionsSee specification sheet
• Turning RadiusSee specification sheet
• Travel SpeedProgrammable with optional handset (0-3.7mph empty / 0-2.9mph loaded)
• Battery Compartment31.6” x 9.06” x OPEN / 31.6" x 13.0" x OPEN
• Battery CapacityIndustrial battery or 224AH AGM battery pack
• ChargerExternal or 120v integral to battery pack

Videos and Case Studies:

 

Big Joe PDSR Walkie Reach Stacker from Bill Pedriana on Vimeo.